 |
 |
|
|
| Motorcycle Alarm |
|
| 1. |
| Q: |
How much current the Stealth / Junior II draw ?? |
| A: |
In Stand-by conditions, Stealth / Junior consume really small current, about 8 mAh, comparing with one small neutral indicator that draw 330 mAh. It means 40 times smaller with neutral indicator. Almost nothing.... |
|
| |
| 2. |
| Q: |
Will Stealth / Junir II harm the battery ?? |
| A: |
With only 8 mA per hour consumed, and the engine charges to battery for about 250 mA per hour, it is totally safe for your battery... |
|
| |
| 3. |
| Q: |
What makes my battery drop ?? |
| A: |
Normally there are 3 conditions you have to check : battery live (about 18 months from new), battery liquid (empty or not), and how often you use your bike...so if your battery has already been used for more than 18 months, then it is time to replace. We also not suggest you to put an alarm on your bike if your bike is rarely use. |
|
| |
| 4. |
| Q: |
What is the best suggestions to maintain my battery ?? |
| A: |
First : replace your battery every 18 months, second : Always check and refill the battery liquid every month you do the service, and third : disconnect the fuse if you don't use your bike for long period like IdulFitri holiday... |
|
| |
| 5. |
| Q: |
Can Stealth / Junior II works with DC 6 Volt's bike ?? |
| A: |
No, Stealth / Junior II can only works in DC 12 Volt |
|
| |
| 6. |
| Q: |
How long the warranty given ?? |
| A: |
We provide one year warranty..
|
|
| |
| 7. |
| Q: |
Will Stealth / Junior II harm the CDI ?? |
| A: |
No, Stealth / Junior II won't harm the CDI, because the way Stealth / Junior II cut off engine is exactly same with motorcycle manufacturer. But mis-installation of the wiring will probably makes the CDI broke, always install the Stealth / Junior II to the proper E-Lock Installer. |
|
| |
| 8. |
| Q: |
Is Stealth / Junior II water-resistance ?? |
| A: |
The circuit of Stealth or Junior II will not damaged because of water. But in wet condition, the frequency of Radio Frequency Receiver Module might shift, and the receive process will not sensitive enough. So better keep the unit dry. |
|
| |
|
|
|
|
|
